Skip to content

EBTOOLS 2 in to T2 adapter

A 2 in nosepiece adapter carrying a T2 male thread for the camera and an M48 internal thread for a filter, with a fully matted bore.

EBTOOLS 2 inch to T2 telescope camera adapter

EBTOOLS 2 in to T2 adapter

A 2 in nosepiece adapter carrying a T2 male thread for the camera and an M48 internal thread for a filter, with a fully matted bore.

Reduction factor
Not published by the maker.
Required back focus
Not published by the maker.
Image circle
Not published by the maker.
Corrector function
Not published by the maker.
Thread standards
2 in nosepiece for a 2 in focuser · M42 × 0.75 male — the T2 thread · M48 × 0.75 internal, at the front
Vignetting
“Full frame with 2 inch, no dark corners”, as the maker states it
Housing
Fully matted internal thread; black hard-anodised outside
Amazon reference
B07MCH2CVN (same reference on 5 Amazon marketplaces)
EAN
0719527383403
  • Carries an M48 filter thread at the front, so a 2 in filter fits in the same part
  • Fully matted bore, which matters immediately in front of a sensor
  • The no-dark-corners claim is made without naming a sensor size

Best for: Putting a T2-threaded camera into a 2 in focuser with a filter in the path

≈ £15 / €15
Check price on Amazon

Specifications

Reduction factor
Not published by the maker.
Required back focus
Not published by the maker.
Image circle
Not published by the maker.
Corrector function
Not published by the maker.
Thread standards
2 in nosepiece for a 2 in focuser · M42 × 0.75 male — the T2 thread · M48 × 0.75 internal, at the front
Vignetting
“Full frame with 2 inch, no dark corners”, as the maker states it
Housing
Fully matted internal thread; black hard-anodised outside
Amazon reference
B07MCH2CVN (same reference on 5 Amazon marketplaces)
EAN
0719527383403

What the part actually is

A 2 in nosepiece that slides into a focuser, with a T2 male thread at the back for a camera and an M48 female thread at the front for a filter. Three interfaces in one machined piece, and no optics anywhere in it.

The filter thread is the useful detail

Most 2 in nosepieces make you choose between a filter and an adapter. This one carries both, which removes a joint from the train and a few millimetres from the back focus budget.

The claim without a format

“Full frame with 2 inch, no dark corners.” No sensor size is named, and the clear aperture is not published. A 2 in barrel threaded M48 passes roughly 46 mm, which is in the region of a full-frame diagonal — that is as far as this page will take it.

The listing itself

Several bullets repeat with keywords appended, and five are entirely empty. The technical content is concentrated in the second bullet, which is precise about all three interfaces.

Availability

German, French and Spanish Amazon stores ran from 15 € to 21 € on the day of the survey.

British Amazon store lists it in local currency, which the euro range above sets aside.

Italian Amazon store stood above 1.6× the cheapest country. A gap that size normally means stock forwarded from abroad rather than a seller on the ground, so that figure is left out of the range above.

American Amazon store gave no result whatever, so the buy button there opens a search rather than an empty page.

Figures as Keepa reported them on the day this page was last updated. Stock and pricing shift without warning.

Prices quoted in this text were read on 17 September 2026. The live price is at the top of the page.

What this fits

All focal reducers